3 Series E46 318Ci (N46) COUPE
67 31 511
Removing and installing/replacing drive for
seat tilt adjustment (front seat removed)
Disconnect plug connection (4).
Note:
Secure drive for seat tilt adjustment (5) against falling out.
Loosen screws (1).
Remove drive for seat tilt adjustment (5) with fixture for plug
connection (3) in direction of arrow from flange (2).
If necessary, remove inner drive shaft from drive for seat tilt
adjustment (5).
Installation:
Make sure drive shaft (1) is correctly seated.
Ensure fixture for plug connection (3) and drive for seat tilt
adjustment (4) on flange (2) are correctly seated.
RA Removing and installing/replacing drive for seat tilt adjustment (front seat rem
BMW AG - TIS
08.02.2013 03:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -