3 Series E46 318d (M47) SAL
Remove bearing pin (1) for tensioning rail.
Lift out tensioning rail (2) towards top.
Release screw (1) between timing case cover and cylinder head.
Note:
Screw (1) is sealed with a sealing ring.
Release screw connection to timing case cover.
Note:
The hydraulic valve clearance compensating elements (HVA)
can fall out when the cylinder head is later put down.
If necessary, remove hydraulic valve clearance compensating
elements and put down in an orderly fashion.
RA Removing and installing cylinder head (M47)
BMW AG - TIS
09.02.2013 03:29
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
