3 Series E46 318d (M47) SAL
Remove front end reinforcement. Release right and left engine
mounts at bottom. Release left and right control arms on engine
carrier. Release screw connection for front axle support and lower
front axle support.
These operations are described in the work step "Replacing front
axle support".
Note:
There is no need to detach the steering gear from the front axle
support.
Detach cable for oil level sensor and reverse gear (E46 only) from
oil sump.
Disconnect plug connection to oil level sensor.
Release oil sump screws on transmission side.
Release screws and remove oil sump towards rear.
RA Removing and installing, sealing or replacing oil sump (M47)
BMW AG - TIS
09.02.2013 03:34
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -
