3 Series E46 318d (M47) SAL
Installation:
Mount vibration damper and align opening to parallel key.
Install new central bolt.
Position special tool 11 6 310 on vibration damper.
Protect engine bracket from damage.
Insert wood between engine support and special tool 11 6 310.
Tighten down central bolt.
Tightening torque,
refer to Technical Data 11 23 2AZ.
RA Removing and installing or replacing vibration damper (M47)
BMW AG - TIS
09.02.2013 03:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -