3 Series E46 318d (M47) SAL
11 31 005
Checking camshaft timing (M47)
Remove cylinder head cover,
refer to 11 12 000.
Crank engine at central bolt in direction of rotation until first
cylinder is in firing TDC position.
Remove plug from alignment bore.
Hold crankshaft in TDC position with special tool 11 2 300.
Caution!
Do not turn the engine back.
Remove special tool 11 2 300 before switching on the
engine.
Fit special tool 11 6 320 to inlet camshaft.
Note:
Special tool 11 6 320 must lie flush on cylinder head.
RA Checking camshaft timing (M47)
BMW AG - TIS
09.02.2013 03:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -