3 Series E46 318d (M47) SAL
11 61 050
Removing and installing intake air manifold
(M47)
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1), remove lower section of microfilter
housing (2) and underlying heater bulkhead,
refer to 51 71 080.
Note:
Screw (1) not visible.
Release screws, lift off front acoustic cover.
Remove intake neck.
Note:
Screw (1) is not visible in vehicle.
Release screws, lift off cover.
RA Removing and installing intake air manifold (M47)
BMW AG - TIS
09.02.2013 04:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
