3 Series E46 318d (M47) SAL
Release screw of rear acoustic cover to intake air manifold.
Note:
Illustration is shown without intake pipe to EGR valve. Intake
pipe on EGR valve must not be removed.
Detach EGR valve from intake air manifold.
Lift out acoustic cover.
Note:
The nuts (1) fall out very easily during removal and
installation, use special tool 00 2 190 if necessary.
Unfasten screws (2) and nuts (1).
Remove intake air manifold.
RA Removing and installing intake air manifold (M47)
BMW AG - TIS
09.02.2013 04:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
