3 Series E46 318d (M47) SAL
Release central nut on injection pump shaft.
Screw in and secure special tool 13 5 190 without forcing screw.
Insert jack screw (1) in special tool 13 5 190 and detach
sprocket wheel from injection pump shaft.
Caution!
Leave special tool 13 5 190 installed until injection pump is
reinstalled; otherwise chain wheel falls out and engine must
be disassembled.
Remove forcing screw only.
RA Removing and installing/replacing injection pump (M47)
BMW AG - TIS
09.02.2013 04:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -