3 Series E46 318d (M47) SAL
Caution!
Do not disengage blocking of injection pump shaft.
Replace seal (1).
Install injection pump with blocked drive shaft in bore in engine
mounting flange.
Tighten down nuts (1) and (2, covered) on bearing pedestal of
injection pump.
Install injection pump support (3) and tighten down screws (1)
and (2).
RA Removing and installing/replacing injection pump (M47)
BMW AG - TIS
09.02.2013 04:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -