3 Series E46 318d (M47) SAL
13 53 200
Replacing all injection lines (M47)
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Removing intake air manifold:
Refer to 11 61 050
.
Cover intake ducts.
Release union nuts on all injector nozzles with special
tool 13 5 020.
Note:
Adjust position of special tool at early stage to prevent any
bending of injection lines.
Plug openings with caps.
Installation:
Tightening torque:
Refer to Technical Data 13 53 7AZ
.
Remove cable channel from retainer and lay to one side.
Release screws (1) and (2) on connecting bridge.
RA Replacing all injection lines (M47)
BMW AG - TIS
09.02.2013 04:44
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -