3 Series E46 318d (M47) SAL
Replace expansion tank:
Unlock coolant level sensor (1) by turning and remove towards
bottom from expansion tank.
Pull lock (1/2) upwards and disconnect coolant hose.
Pull out expansion tank towards rear top from retaining plate and
from lower fitting.
Installation:
Check O-rings. Do not under any circumstances coat O-rings
with antiseize agent.
Retaining lug must engage in opening in retaining plate.
RA Removing and installing/replacing coolant expansion tank (M47)
BMW AG - TIS
09.02.2013 05:11
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -