3 Series E46 318d (M47) SAL
Remove heat shield (1).
Support transmission with a workshop hoist.
Release screws and remove cross-member (1).
Tightening torque, 23 71 1AZ / 2AZ.
Release screws.
Tightening torque 26 11 1AZ.
Installation:
Replace self-locking nuts.
Grip propeller shaft and release screws on front center bearing
(1).
Tightening torque 26 11 6AZ.
RA Removing and installing transmission (S5D 320Z, M47)
BMW AG - TIS
09.02.2013 05:41
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
