3 Series E46 318d (M47) SAL
Replacing hydraulic unit
Release screws (1) and remove bracket (2) from hydraulic unit (3).
Release screws (1) and detach control module from hydraulic unit.
Installation:
Replace micro-encapsulated screws.
Observe Tightening Torque,
refer to 34 51 1AZ.
RA Removing and installing/replacing DSC hydraulic unit
BMW AG - TIS
09.02.2013 08:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -