3 Series E46 318d (M47) TOUR
Release blocking screw (1) and remove spacer plate (2).
Retighten blocking screw (1) to 31 Nm.
The injection pump is now blocked and cannot be rotated
anymore.
Caution!
If the injection pump is rotated while the blocking screw (1) is
tightened, the pump will be damaged and will have to be
replaced.
Slacken chain wheel nut (3).
Release central bolt (2) and remove vibration damper (1) again.
Press in clamping piston at bottom and lock with special
tool 11 3 340 (alignment pin).
RA Replacing both timing chains (M47)
BMW AG - TIS
10.02.2013 14:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -