3 Series E46 318d (M47TU) SAL
00 00 249
BMW engine oil service (M47TU)
(changing engine oil and oil filter insert)
Caution!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Note:
Do not damage main flow oil filter cover, release and tighten
down with a socket only. When the main flow oil filter cover is
released, the oil flows from the oil-water heat exchanger back
into the sump.
Release main flow oil filter cover and take off.
Installation:
Tightening torque 11 42 2AZ
.
The tightening torque of 25 +5 Nm is stamped in the cover.
Installation:
Replace seals and coat with oil.
RA BMW engine oil service (M47TU)
BMW AG - TIS
11.02.2013 12:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
