3 Series E46 318d (M47TU) SAL
11 12 504
Disassembling and assembling cylinder head
(M47 / M47TU)
Special tools required:
•
00 1 450
•
11 0 192
•
11 0 342
•
11 0 343
•
11 1 045
•
11 1 065
•
11 1 067
•
11 1 442
•
11 3 131
•
11 3 132
•
11 3 136
•
11 3 346
•
11 6 050
(cylinder head removed)
Caution!
The glow plugs protrude at the sealing face and may be
damaged when the cylinder head is put down.
Remove glow plugs with special tool 11 6 050 .
If necessary, drill out special tools 11 6 050 which were supplied
before 4/98 to 9.5 mm dia. 20 mm deep.
Installation:
Tightening torque, 12 23 2AZ .
Remove hydraulic valve clearance compensating elements and
put down in an orderly fashion.
Remove thermostat.
Remove coolant temperature sensor.
RA Disassembling and assembling cylinder head (M47 / M47TU)
BMW AG - TIS
11.02.2013 13:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
