3 Series E46 318d (M47TU) SAL
11 28 010
Removing and installing/replacing alternator
drive belt (M57 / M47TU)
Note:
If the drive belt is to be reused, mark direction of travel and
reinstall drive belt in same direction of rotation.
Loosen screws (1).
Remove acoustic cover (2) at front.
Note:
For M47TU engine.
Release screws.
Lift off acoustic cover.
Remove fan cowl.
Remove and install A/C compressor drive belt.
RA Removing and installing/replacing alternator drive belt (M57 / M47TU)
BMW AG - TIS
11.02.2013 13:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -