3 Series E46 318d (M47TU) SAL
11 31 091
Removing and installing/replacing hydraulic
chain tensioner (M47TU / M47T2)
Special tools required:
•
11 3 340
Remove front timing case cover.
Press both tensioner rails (1) in direction of arrow. Insert special
tool 11 3 340 in designated openings in chain tensioner (3).
Release screws (3).
Remove chain tensioner (2).
Note:
The illustration shows the upper tensioner rail already removed
and the chain tensioner secured with the special tool.
Warning!
Tensioner pistons are under spring pressure.
Risk of injury during removal of plug mandrels.
RA Removing and installing/replacing hydraulic chain tensioner (M47TU / M47T2)
BMW AG - TIS
11.02.2013 13:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -