3 Series E46 318d (M47TU) SAL
12 41 020
Removing and installing/replacing starter
motor (M47TU)
Note:
Read fault memory. Switch off ignition.
Observe instructions for disconnecting and connecting battery.
Disconnect battery negative lead from battery and lay to one side.
Remove underbody protection at front and rear.
Remove reinforcement plate.
Drain engine oil.
Release screw (1).
Remove side acoustic insulation (2).
Remove expansion rivets.
Release intake hood in direction of arrow and remove in opposite
direction together with intake snorkel.
RA Removing and installing/replacing starter motor (M47TU)
BMW AG - TIS
11.02.2013 13:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
