3 Series E46 318d (M47TU) SAL
Press locks together of plugs (1) for glow elements.
Disconnect plugs.
Disconnect plug connection on crankshaft position sensor (2).
Disconnect plug connections on control unit for glow elements (1).
Note:
Connection from control unit to starter motor can remain.
Unfasten screws.
Remove cable channel.
Disconnect positive lead (1) and both control lines (2 and 3) on
starter.
Installation:
Tightening torque 12 41 4AZ
.
Disconnect plug connection on alternator.
RA Replacing wiring harness section for engine (M47TU)
BMW AG - TIS
11.02.2013 13:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -