3 Series E46 318d (M47TU) SAL
Remove shaped part for cavity sealing and clean contact surface
(1) on car.
Clean contact surface on sunroof water drainage pipe (2).
Shaped part for cavity sealing is underneath sunroof water
drainage pipe (2).
Place shaped part for cavity sealing (1) on side panel
reinforcement spare part and mark out connection face.
Remove shaped part for cavity sealing and clean connection face
on spare part.
Grind connection faces on car and spare part, clean and coat with
zinc dust paint.
Apply window adhesive approx. 20 mm high to connection face
(1) on side panel reinforcement spare part.
1 = Bores for clips for securing shaped part to cavity sealing.
Apply window adhesive approx. 20 mm high to connection face (1)
on body and to sunroof water drainage pipe.
RA Replacing complete rear left wheel arch
BMW AG - TIS
11.02.2013 19:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -