3 Series E46 318d (M47TU) TOUR
11 42 020
Removing and installing/sealing or replacing
complete main flow oil filter (M47TU / M47T2)
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an alternator
malfunction.
Note:
The preliminary work for removing the main flow oil filter is
described in the repair instruction
Removing oil-water heat exchanger.
Note:
For E46 automatic:
Remove fan cowl.
Note:
For E46 manual:
Remove radiator blind.
Remove main flow oil filter cover, remove oil filter element and
drain off engine oil.
RA Removing and installing/sealing or replacing complete main flow oil filter (M47T
BMW AG - TIS
11.02.2013 13:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -