3 Series E46 318d (M47TU) TOUR
12 21 520
Replacing preheating control unit (M47TU /
M47T2)
Necessary preliminary tasks:
•
Switch off ignition
•
E46, E60, E61: Remove reinforcement plate
•
Remove underbody protection
Note:
Installation location: on intake air manifold, bottom.
Disconnect plug on glow control unit.
Unscrew nuts.
Remove glow control unit.
RA Replacing preheating control unit (M47TU / M47T2)
BMW AG - TIS
11.02.2013 14:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
