3 Series E46 318d (M47TU) TOUR
13 53 570
Replacing pressure regulator on pressure
accumulator of injection system (M47TU,
M47T2)
Necessary preliminary tasks:
•
Read fault memory of DDE control unit
•
Switch off ignition
•
Remove intake air manifold
Recycling:
Catch and dispose of escaping fuel.
Observe country-specific waste-disposal regulations.
Installation:
Pressure regulator may only be used once!
Pressure regulator must be replaced (cutting seat gasket) after
screw connection has been released.
Positioning before final tightening!
RA Replacing pressure regulator on pressure accumulator of injection system (M47TU,
BMW AG - TIS
11.02.2013 14:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -