bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

1 RA Replacing Control Unit (DDE) For M47TU|Page 832 > < 11 RA Checking Injectors (without Piezo-technology) With Return Flow Quantity Meter|Page 829
Page 1
background image

13 61 501

Replacing control unit (DDE) for M47TU

Follow instructions for removing and installing electronic
control units.

Refer to general information in MG12.

Read fault memory of DDE control unit. Switch off ignition.

Observe instructions for disconnecting and connecting battery.

Refer to general information in MG12.

Disconnect and cover battery negative lead.

Installation location of control unit:

In electronics box in direction of travel on left.

Release screws (1) and remove cover.

Tightening torque, 12 90 4AZ.

Disconnect plug connections (1) from DDE control unit.

Withdraw control unit from electronics box.

RA  Replacing control unit (DDE) for M47TU

BMW AG - TIS

11.02.2013  14:52

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

1 RA Replacing Control Unit (DDE) For M47TU|Page 832 > < 11 RA Checking Injectors (without Piezo-technology) With Return Flow Quantity Meter|Page 829