3 Series E46 318d (M47TU) TOUR
41 31 010
Replacing roof panel (models with slide/tilt
sunroof)
Read contents of Body, General.
Remove and/or loosen following components:
-
Windscreen
-
Rear window
-
Roof liner
-
Sun roof
-
If necessary, rear parcel shelf
-
Wiring harness (partially)
Vehicle parts located in the repair zone or threatened by heat,
sparks or dust, must be removed or covered.
Note:
In the area of the windscreen frame, the slide/tilt sunroof
reinforcement of the roof outer skin is additionally bonded with
the windscreen frame!
When replacing the roof outer skin, this bonding must be re-
established!
View of bonding of slide/tilt sunroof reinforcement of roof outer
skin / windscreen frame from passenger compartment.
(1) = Windscreen frame
(2) = Adhesive layer
(3) = Slide/tilt sunroof reinforcement of roof outer skin
Observe bonding specifications for body components.
Installation:
Complete all weld joints and brazed joints as standard on the new
component.
In event of lack of accessibility, replace welding spots with MAG
plug welds.
RA Replacing roof panel (models with slide/tilt sunroof)
BMW AG - TIS
11.02.2013 20:52
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -