3 Series E46 318i (M43TU) TOUR
Caution!
Open-end wrench can slip off tensioning rail.
Slowly and carefully push back tensioning rail with open-end
wrench and remove strain from chain.
Remove chain wheel and chain from camshaft.
Remove oil line to camshaft lubrication.
Release bearing cap.
Remove camshaft.
Installation
Installation of camshaft is described separately from removal.
Assembly sequence differs between removal and installation.
RA Replacing camshaft (M43TU)
BMW AG - TIS
11.02.2013 13:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -