3 Series E46 318i (M43TU) TOUR
13 54 030
Removing and installing/sealing throttle
assembly (M43TU)
Turn off ignition.
Release screw (1) supporting throttle assembly.
Disconnect plug connections on throttle potentiometer and idle
speed control valve.
Release screws (1) and remove cover (2).
Remove Bowden cable (2) from rubber mount (1) and unhook
from throttle actuation.
With cruise control, remove second Bowden cable in same way.
Release hose clip (3), remove boot.
Installation:
Remove Bowden cable for throttle actuation (M43 engine),
refer to 35 41.
RA Removing and installing/sealing throttle assembly (M43TU)
BMW AG - TIS
11.02.2013 14:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
