3 Series E46 318i (M43TU) TOUR
Pull support member (1) slightly out of center console.
Depending on equipment, press fitted switches (2) forwards out of
support member (1) and disconnect.
Disconnect cable from cigarette lighter on rear side of support
member (1).
Remove support member (1).
Release screw (1) on interlock cable.
Tightening torque, 25 16 5AZ.
Remove cable plug (2) from fixture and disconnect.
Disconnect cable plugs (1).
Release screws and lift out shift tower (2) a little.
Tightening torque, 25 16 3AZ.
Unhook interlock cable.
Remove shift tower with cable.
Installation:
Adjust interlock cable and check interlock operation.
RA Removing and installing / replacing shift tower (Steptronic)
BMW AG - TIS
11.02.2013 17:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -
