Removing and Installing Servodrive for Tank Filler Flap | BMW 3 Series E46 318i (M43TU) TOUR
Unlock plug connection (1) and disconnect.
Slacken screws (2).
Feed out servodrive for tank filler flap (3) towards rear and pull
out in direction of arrow.
Convertible:
Removing right luggage compartment wheel arch trim.
Unlock plug connection (1) and disconnect.
Slacken screws (2).
Feed out servodrive for tank filler flap (3) towards rear and pull
out in direction of arrow.
All:
Installation:
Insert servodrive for tank filler flap (1) in direction of arrow into
gaiter (2).
RA Removing and installing/replacing servodrive for tank filler flap
BMW AG - TIS
12.02.2013 05:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
