bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA BMW Service-inspection (petrol_gasoline Vehicles)|Page 426 > < 3 RA Safety Instructions For Handling Oil
Page 1
background image

00 .. .

BMW service-inspection (petrol/gasoline vehicles)

Important!

The operations set out below always refer to the maximum possible scope of a service-inspection.

The exact scope of the vehicle in question must be printed out with the vehicle identification number from
the KSD CD.

Body / electrical system

Check lighting system: instrument and indication field lighting, heater fan, signal horn, headlight flasher and hazard
warning lights

Windscreen wash/wipe system: check wiper blades and spray nozzle adjustment

Seat belts: check condition of belt strap, function of inertia reel mechanism, locking reel, belt buckle

Locking systems: check status and function, oil or grease if necessary

Battery: 

check acid level, top up with distilled water if necessary.

If necessary recharge

Heating/air conditioning: change microfilter / carbon canister

Body and underbody: check for corrosion and damage - except cavities

Convertible only:

Trigger rollover protection system (Convertible) via diagnosis interface. Caution! Remove hard top or open
convertible top first.

Cover for convertible top frame outlet: treat guide with protecting spray

Engine compartment

Fault memory interrogation

Change engine oil and oil filter

Replace spark plugs

Coolant hoses: visually inspect for leaks, check coolant level and concentration, top up if necessary Caution!
Replace coolant at least every 3 years.

Reset service interval indicator according to factory specifications

Windscreen washer system and intensive cleaning system: check fluid level, top up if necessary

Power steering/ride-height control: visual inspection for leaks, check fluid level, top up fluid if necessary

Caution! Change brake fluid in accordance with service interval indicator, no later than every 2 years

Air cleaner: Replace air cleaner element

Chassis / suspension area

Front and rear disc brake pads:

check pad thickness with measuring gauge.

If pads are replaced: Clean brake ducts. Brake discs: Check surface and thickness. If replacing at rear: check
parking brake linings. Grease wheel centering on light alloy wheels.

RA  BMW service-inspection (petrol/gasoline vehicles)

BMW AG - TIS

11.02.2013  13:00

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA BMW Service-inspection (petrol_gasoline Vehicles)|Page 426 > < 3 RA Safety Instructions For Handling Oil