3 Series E46 318i (N42) SAL
Detach bracket with special tools 00 7 500 and 31 2 151 from
control arm.
Important!
Never re-use a rubber mount pulled off control arm. Rubber-
coated inner sleeve is destroyed when pulled off dry.
Important!
Control arms with pin shape (A) must be replaced!
Only control arm with pin shape (B) may be reinstalled!
Mark out measurement (A) at bottom at control arm pin.
A = 290.9
±
1 mm
Installation:
Outer edge (B) of rubber mount must be flush with marked
measurement (A).
RA Removing and installing/replacing both brackets for control arm
BMW AG - TIS
11.02.2013 17:27
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
