3 Series E46 318td (M47TU) COMP
Remove oil filter element (1) towards top.
Installation:
Press oil filter element (1) onto fixture in oil filter housing.
Open cover in reinforcement plate.
Open oil drain plug or draw off oil through guide tube for oil
dipstick.
Installation:
Replace sealing ring.
Tightening torque, 11 13 1AZ
.
Fill system with engine oil.
Assemble vehicle and set down in horizontal position.
Start engine and run at idle until oil indicator lamp goes out.
Switch off engine, wait approx. 5 minutes and then check engine
oil level.
If necessary, top up engine oil.
RA BMW engine oil service (M47TU)
BMW AG - TIS
11.02.2013 16:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
