3 Series E46 318td (M47TU) COMP
Withdraw oil-filter element towards top.
Installation:
Press oil-filter element onto support in oil-filter housing.
Open cap in engine underguard.
Open oil drain plug or draw off oil.
Installation:
Replace sealing ring.
Tightening torque, 11 13 1AZ
.
Note:
Illustration from M57.
Top up engine oil.
Complete vehicle and set in horizontal position.
Start engine and run at idle until oil indicator lamp goes out.
Switch off engine, wait approx. 9 minutes and then check engine
oil level.
Top up engine oil if necessary.
RA BMW engine oil service incl. supplementary service (M57 / M47TU)
BMW AG - TIS
11.02.2013 16:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
