3 Series E46 318td (M47TU) COMP
Remove microfilter.
Open cable duct on lower section of microfilter housing (2) and
feed out cable(s).
Release screws (1).
Remove lower section of microfilter housing (2).
Remove expansion rivets.
Release intake hood in direction of arrow and remove in opposite
direction together with intake snorkel.
Release screws.
Lift off acoustic cover.
Remove heater bulkhead.
Unfasten screws.
Remove rear acoustic cover.
Remove lower section of microfilter housing.
RA Removing and installing, sealing or replacing oil sump (M47TU)
BMW AG - TIS
11.02.2013 16:26
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
