3 Series E46 318td (M47TU) COMP
11 31 005
Checking camshaft timing (M47TU)
Special tools required:
•
11 2 300
•
11 6 320
Remove cylinder head.
Crank engine at central bolt in direction of rotation until first
cylinder is in firing TDC position.
Camshafts (1) are situated in position shown in illustration.
Remove plug from special tool bore.
Hold crankshaft in TDC position with special tool 11 2 300 .
Caution!
Do not turn the engine back.
Remove special tool 11 2 300 before switching on the
engine.
RA Checking camshaft timing (M47TU)
BMW AG - TIS
11.02.2013 16:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
