bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

ABOUT US
1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M47TU _ M47T2)|Page 674 > < 1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M47TU _ M47T2)

3 Series E46 318td (M47TU) COMP

Page 2
background image

Installation:

Apply a thin coat of petroleum jelly to sealing surfaces of
sealing rings (1).

Insert sealing rings (1) in intake snorkel.

Release clamp (1) on EGR pipe.

Tightening torque 11 71 1AZ.

Release screw (2).

Release screws (3) and remove heat shield.

Note:

Engines with EGR cooler: detach EGR cooler.

Release screw (1).

Slacken screw (2).

Turn fixture in direction of arrow.

Release quick-release coupling on intercooler.

Remove complete charge air tube/hose.

Important!

-

Fit charge air hoses without grease and dry.

-

Seal turbocharger openings with a cap immediately.

RA  Removing and installing, sealing/replacing exhaust manifold (M47TU / M47T2)

BMW AG - TIS

11.02.2013  16:53

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M47TU _ M47T2)|Page 674 > < 1 RA Removing And Installing, Sealing_replacing Exhaust Manifold (M47TU _ M47T2)