3 Series E46 318td (M47TU) COMP
Slacken screws (2).
Installation:
Replace all gaskets.
Clean sealing faces on exhaust manifold.
Release all 8 nuts.
Remove exhaust manifold.
Installation:
Replace seals.
Apply a thin coat of copper paste (CRC) to screw threads.
refer to BMW Parts Service.
Replace nuts.
Tightening sequence from inside to outside!
Tightening torque 11 62 1AZ
.
RA Removing and installing, sealing/replacing exhaust manifold (M47TU / M47T2)
BMW AG - TIS
11.02.2013 16:53
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -