3 Series E46 318td (M47TU) COMP
Disconnect battery negative lead (1) to alternator at solenoid
switch of starter motor.
Tightening torque 12 41 4AZ .
Disconnect alternator plug connections.
Slacken screw connection on belt pulley of power steering pump.
Remove alternator drive belt.
Release screw (1).
Remove idler pulley for drive belt.
Release screws and remove belt pulley on power steering pump.
RA Removing and installing/replacing alternator (M47 / M47TU)
BMW AG - TIS
11.02.2013 17:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -