3 Series E46 318td (M47TU) COMP
13 53 170
Replacing all pressure lines (M57 / M57TU)
Special tools required:
•
13 5 020
The work steps are shown on the M57.
Read out fault memory of DDE control unit. Turn off
ignition.
Layout of common rail system (M57 / M47TU / M57TU).
Remove and install intake air manifold.
Cover intake ducts.
Important!
When working on the oil, coolant or fuel circuit, you must
protect the alternator against contamination.
Cover alternator with suitable materials.
Failure to comply with this procedure may result in an
alternator malfunction.
RA Replacing all pressure lines (M57 / M57TU)
BMW AG - TIS
11.02.2013 17:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
