3 Series E46 318td (M47TU) COMP
41 00 ...
Position of shaped parts for cavity bulkhead
In order to reduce interior noise and avoid condensation water, the cavities are sealed in specific areas of the body. To
do this, shaped parts are inserted in the cavities. These shaped parts adapt themselves optimally due to heating of the
body to approx. 180
°
C by expansion to the shape of the cavities.
As it is not possible to heat the body to this extent for a body repair, a different procedure has been laid down for this
instance.
RA Position of shaped parts for cavity bulkhead
BMW AG - TIS
11.02.2013 21:45
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
