3 Series E46 318td (M47TU) COMP
Weld reinforcement plate (1) approx. 20 mm in length.
Weld stepped areas (2).
Spot-weld areas (3).
Mark new side section reinforcement part as shown in illustration
and cut.
Measurement (a) = approx. 270 mm from 12 mm dia. bore
above.
Clean all connecting points on new part and body and coat with
welding primer.
Weld reinforcement plate (1) approx. 30 mm in length.
Spot-weld areas (2).
RA Replacing rear left outer section of wheel arch (side panel removed)
BMW AG - TIS
11.02.2013 22:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -