3 Series E46 318td (M47TU) COMP
Note:
If necessary, slide faulty clips (1) into removal opening (2) and
remove.
Installation:
If necessary, replace faulty rubber grommets (1) and clips (2).
Coat rubber grommets (1) with water prior to fitting.
Clip clips with rubber grommets into protective strip (3) and align.
Clip protective strip (3) into side panel.
RA Removing and installing/replacing protective strip on side panel at rear left or
BMW AG - TIS
11.02.2013 22:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -