3 Series E46 318td (M47TU) COMP
Move backrest into installation position and pull out belt slightly.
Clamp belt firmly.
E46 only:
Unfasten screws.
Remove trim.
E83 only:
Trim not screwed down.
Lever out trim with special tool 00 9 317 .
Separate webbing.
Installation:
Feed out strap so that belt stopper (1) is located between upper
guide (2) and lower guide (3) of belt finisher.
Lever out cover all round.
RA Replacing backrest cover for right rear seat (through-loading system)
BMW AG - TIS
12.02.2013 02:24
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
