3 Series E46 318td (M47TU) COMP
64 52 520
Removing and installing/replacing complete
A/C compressor (M47, M47TU)
Caution!
Follow instructions for compressor replacement without fail.
Note:
A/C system is drawn off.
Remove front splash guard.
Remove compressor drive belt.
M47:
Remove intake neck.
Unscrew nut (1).
Unhook vacuum hose (2) from mounts (3).
Lever out vacuum tank (4) and place to one side in direction of
arrow.
Loosen screws (1).
Remove lines (2) and (3).
Installation:
Replace sealing rings.
Observe tightening torque, 64 52 1AZ
.
Disconnect plug connection (4) in direction of arrow.
RA Removing and installing/replacing complete A/C compressor (M47, M47TU)
BMW AG - TIS
12.02.2013 04:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
