3 Series E46 318td (M47TU) COMP
65 75 551
Removing and installing/replacing pitch
sensor
Remove side trim panel at rear right.
Remove insulating mat.
Release screws (1) and remove side wall cover (2) in direction
of arrow.
Disconnect plug connection (1).
Unscrew nuts (2).
Remove pitch sensor (3) towards top.
Replacement:
Lift lock (1) and remove pitch sensor (2) in direction of arrow
from holder (3).
RA Removing and installing/replacing pitch sensor
BMW AG - TIS
12.02.2013 05:02
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -