3 Series E46 318ti (N42) COMP
11 12 719
Grinding cylinder head lower face (N42 / N46)
(cylinder head dismantled)
Check evenness of cylinder head sealing surface with a standard
straight-edge (1).
Note:
Maximum plane deviation: longitudinal 0.10 mm.
Note:
Maximum plane deviation: transversal 0.05 mm.
Check measurement (A) before machining the cylinder head.
Original measurement and machining limit.
RA Grinding cylinder head lower face (N42 / N46)
BMW AG - TIS
12.02.2013 01:15
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -