3 Series E46 318ti (N42) COMP
11 27 610
Removing and installing/replacing balancing
shaft housing with balancing shafts
(N40/N42/N45/N46)
Important!
Oil pump and balancing shafts form a single unit and must not
be separated.
Removal and installation of the balancing shafts is described in
the section "Removing and installing oil pump".
RA Removing and installing/replacing balancing shaft housing with balancing shafts
BMW AG - TIS
12.02.2013 01:31
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
