3 Series E46 318ti (N42) COMP
11 33 515
Removing and installing / replacing rocker
arms on inlet side (N42 / N46)
Special tools required:
•
11 9 320
Necessary preliminary tasks:
•
Remove ignition coils.
•
Remove spark plugs.
•
Remove cylinder head.
•
Remove inlet adjustment unit.
•
Remove upper chain guide.
•
Remove bearing bracket.
Deposit bearing bracket with inlet camshaft upwards in special
tool 11 9 320 .
Important!
Rockers arms (1) are divided into individual tolerance
classes.
The tolerance classes are designated as illustrated with the
numbers from 1 to 4.
Used rocker arms (1) may only be reused in the same
position.
Remove rocker arms (1) on inlet side and set aside in neat order.
RA Removing and installing / replacing rocker arms on inlet side (N42 / N46)
BMW AG - TIS
12.02.2013 01:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
