3 Series E46 318ti (N42) COMP
Installation:
Threads of new oxygen sensors are already coated with
Never Seez Compound.
If an oxygen sensor is reused, only apply a thin and uniform
coat of Never Seez Compound (refer to BMW Parts
Service) to thread.
Oxygen sensor section projecting into exhaust system branch
must not be cleaned or come into contact with lubricant.
Pay attention to cable routing for oxygen sensors.
Tightening torque 11 78 1AZ
.
Cover oxygen sensors when applying underseal.
Check function of DME.
RA Replacing both oxygen control sensors (N42/N46)
BMW AG - TIS
12.02.2013 01:58
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
